Model Name/Number; VE IG-01 Gross Weight: 7Kg Max Output Pressure: 500Bar Voltage: 220V Wattage: 500W The machine consists of a pump, a reservoir, and a packing gland. The pump is used to draw the resin from the reservoir and inject it into the cracks or voids. The packing gland is used to prevent the resin from leaking back out of the pump. The Bosch VE Injection Grouting Machine has a maximum output pressure of 500 bar (7250 psi) and a flow rate of 1 liter per minute. It is also equipped with an automatic return system that prevents the resin from hardening in the pump. The Bosch VE Injection Grouting Machine is typically used for grouting cracks in foundations, walls, and floors. It can also be used for filling voids in concrete structures, such as around anchor bolts or post-tensioning tendons. If you are looking for a portable and easy-to-use grouting machine, the Bosch VE Injection Grouting Machine is a good option. However, it is important to note that this machine is not suitable for grouting large or deep cracks or voids. For these applications, you would need a more powerful grouting machine. Here are some of the advantages of using the Bosch VE Injection Grouting Machine: Portable and easy to use High output pressure Automatic return system Affordable Here are some of the disadvantages of using the Bosch VE Injection Grouting Machine: Not suitable for large or deep cracks or voids Can be difficult to clean Not as durable as some other grouting machines

Usage/Application: Grouting Pump Type: Radial Piston Pumps Material: MS and Plastic Brand: Vision Enterprises Voltage: 220 V Frequency: 50 Hz Power Source: Electric Pressure of Restarting: Less than 150 Ba Weight: 9 Kg Maximum Output Pressure: 500 Bar Safe range of High-Pressure Hose: Less than 300 Bar Flow Rate: 1.0 l/min Power: 690 W Model Name/Number: VE IG-02 Safe range of Switch Valve: Less than 350 Bar Material of Application: Double liquid-type PU Foam Waterproofing plugging agent, insulation material Double liquid-type quick-setting PU/EPOXY reinforcing agent 1:1 Matching double-liquid non particle low-viscosity liquid. Application Field: Subway Station, Tunnel, Culvert, Foundation Improvement, Soil Settlement, Reservoir, Port Project, Top Slab, Crack, Construction Join, Shrinkage Crack, Basement hairline crack etc. water stop projects Full set of Machine Include: Drill: 1 set 550W High pressure hose: 2 pc 5M Shut-off value: 1 set Repairing kit: 1 set Seal set: 1 set T type wrench: 2 set Rubber pad: 1 pcs Zerk: 1 pc Filter: 2 pcs Material cup: 2 set

Nozzle Size: 1 mm Air Consumption: 8 - 9 (cfm) Usage/Application: airless Material: Stainless Steel Body Material: Stainless Steel Color: Silver An airless spray gun is a painting tool that uses high pressure to atomize paint and propel it onto a surface without the need for compressed air. This results in a more even and consistent finish compared to traditional rollers or brushes, making it ideal for large or difficult-to-reach areas. How Does an Airless Spray Gun Work? Paint Reservoir: Paint is poured into the reservoir, which can be located at the top or bottom of the gun depending on the model. Pump: A hydraulic pump pressurizes the paint, typically up to 3,000 psi. Filter: The paint passes through a filter to remove any impurities that could clog the nozzle. Nozzle: The pressurized paint exits through a small nozzle, where it is atomized into a fine spray pattern. Trigger: Pulling the trigger controls the flow of paint. Airless Spray Gun Components: Gun Body: Houses the trigger, handle, and fluid connections. Trigger Guard: Protects the trigger from accidental activation. Fluid Inlet: Where paint enters the gun from the pump or reservoir. Nozzle Guard: Protects the nozzle from damage and helps direct the spray pattern. Nozzle: Determines the spray pattern and fan size. Types of Airless Spray Guns: Handheld: Most common type, ideal for smaller projects and portability